Changing the technological distances of the main working bodies of modern carding machines and their analysis

F.F.  Kazakov; N.N. Sattarova; J. Umirov; I. Rajabov

doi:10.47813/2782-2818-2022-2-2-0401-0408

Authors

F.F. Kazakov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
N.N. Sattarova Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
J. Umirov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
I. Rajabov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

DOI:

https://doi.org/10.47813/2782-2818-2022-2-2-0401-0408

Keywords:

weed impurities, fibers, yarn, quality, productivity, productive efficiency, exhaust hood, exhaust device

Abstract

The article discusses ways to increase the performance of a carding machine during the processing of cotton fiber, depending on the increase in the speed modes of the main combing organs (receiving drum and main drums), in order to improve the quality of carding surfaces, increase the area of the combing. Tables are given about the intervals that are installed on the technological equipment of the carding machine. In particular, two combing segments were used, and three combing segments and a waste cleaning device were used for the final softening of the products in the central aspiration zone of the cards. The segments installed on the machine are made by Rieter.

Author Biographies

F.F. Kazakov, Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Kazakov F.F., Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

N.N. Sattarova , Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Sattarova N.N., Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

J. Umirov , Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Umirov J., Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

I. Rajabov , Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Rajabov I., Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

References

Usenko V.A. et al. Spinning of chemical fibers. M.: RIO MGTA, 1999, 471 p.

Baranova A.A. Technology and equipment of textile production. UO "VGTU" Vitebsk, 2008, 358 p.

Farxot Kazakov et al. Methods to improve hackles in the production of quality yarn, Jurnal of Physics: Conference Series, 2021, 2094. 042091.

Kazakov F.F., Sattarova N.N., Rajabov A., Nodirova M. A study of the study of the basic physico-mechanical and technological properties of camel wool fiber, Scientific electronic journal Matrix of scientific knowledge, 2021, 6(2), 31-40.

Kazakov F.F., Sattarova N.N., Shirinova N.I. Prospects for high-quality production of rovings on roving machines, Scientific journal Archivarius, 2021, 2(56), 36-41.

Abrorov A., Fedorov S., Rajabov O., Kuvoncheva M., Mukhammadov M. Microstructural analysis of disc saws of fiber-extracting machines, AIP Conference Proceedings, 2021, 2402, 020050.

Mardonov S.E., Shokirov L.B., Rakhimov H.K. Development of technology for obtaining starch gluing modified with uzkhitan and hydrolyzed emulsion, Journal of Physics: Conference Series, 2021, 2094, 042070.

Giyasova D.R., Sadullayeva D.R., Kazakova D.S. Research of increase the strength of warp yarns for knitting strong fabrics, AIP Conference Proceedings, 2021, 2402, 070044.

Mardonov S., Saidov K. Structural and mechanical properties of new sizing compositions based on natural and synthetic water-soluble polymers, Modern Innovations, Systems and Technologies, 2021, 1(3), 65-69.

Giyasova D.R., Sadullaeva D.A., Kazakova D.S. Improving the drawing mechanism of a drawing frame machine for forming threads by preliminary estimate fabric quality indicators, Journal of critical reviews Multidisciplinary review journal, 2020, 7(5), 370-375.

Rashit Nurboev et al. Improvement of product drafting process in drafting devices of the spinning machines with the application of straps, Jurnal of Physics: Conference Series, 2021, 2094, 042079.

Kazakov F.F., Sattarova N.N. The main combing organs of the carding machine, International Journal of Advanced Research in Science, Engineering and Technology, 2019, 6(11) 11658-11663.