Анализ возможностей волоконотделения в существующих параметрах профиля зубьев дисковой пилы

Akbar Abrorov; Orzumurod  Ikromov

doi:10.47813/2782-2818-2021-1-4-55-61

Analysis of capabilities of fiber separation in the existing parameters of the teeth profile of a disc saw

Authors

Akbar Abrorov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
Orzumurod Ikromov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

DOI:

https://doi.org/10.47813/2782-2818-2021-1-4-55-61

Keywords:

process of fiber separation, capture of cotton fiber, feather, fire bar, disc saw, saw teeth

Abstract

The article covers the gripping capabilities of cotton fiber by tooth profiles of the disc saw. The working parameters between the teeth have been determined. The process of impact of cottonseeds on the saw teeth has been studied, as well as the regularity of the effect of the impact force on the saw tooth and on the indicators of the hardness of the seed shell have been determined.

References

Мирошниченко, Г.И. и др. Оборудование и технология производства первичной обработки хлопка / Г.И. Мирошниченко и др. – Т., «Укитувчи», 1980. – с. 328.

Abrorov, A. Method of thermal treatment of saw disk teeth of fiber-processing machines by laser quenching / A. Abrorov, M. Kuvoncheva, O. Rajabov, M. Mukhammadov, S. Jumaev // IOP Conference Series: Materials Science and Engineering. – 2020. – № 862. – 032034.

Imomqulov, Sh. Influence to Optimization Geometric Parameter Saws on His (Its) Capacity to Work / Sh. Imomqulov, Z. Abduqahhorov // International Journal of Recent Technology and Engineering. – 2020. – № 9(1). – P. 1743-1753.

Imomqulov, Sh. Improvement Geometric Parameter Saws And Increasing His(Its) Capacity To Work / Sh. Imomqulov, Z. Abduqahhorov // International Journal of Engineering and Technology. – 2020. – № 12(3). – P. 503-507.

Urinov, N. 2020 Technology of ionic-plasmic nitriding of teeths of disc saw of the knot of saw cylinder / N. Urinov, M. Saidova, A. Abrorov, N. Kalandarov // IOP Conference Series: Materials Science and Engineering. – № 734(1). – 012073.

Саидов, Х. О рациональном профиле зуба джинной пилы / Х. Саидов // Журнал Янги техника, ГНТК УзССР по координации научно-исследовательских работ ТТИ. – 1963. – № 6. – С. 22-24.

Downloads

pdf (Русский)

Published

2021-12-30

How to Cite

Abrorov, A., & Ikromov, O. . (2021). Analysis of capabilities of fiber separation in the existing parameters of the teeth profile of a disc saw. Modern Innovations, Systems and Technologies, 1(4), 55–61. https://doi.org/10.47813/2782-2818-2021-1-4-55-61

Conference Proceedings Volume

Vol. 1 No. 4 (2021)

Section

Applied questions and problems of application of systems and technologies.

License

The journal MIST - "Modern Innovations, Systems and Technologies" publishes materials under the terms of the Creative Commons Attribution 4.0 International (CC BY 4.0) license, hosted on the official website of the non-profit corporation Creative Commons:
This work is licensed under a Creative Commons Attribution 4.0 International License.

This means that users can copy and distribute materials in any medium and in any format, adapt and transform texts, use content for any purpose, including commercial ones. At the same time, the terms of use must be observed - an indication of the author of the original work and the source: you should indicate the output of the articles, provide a link to the source, and also indicate what changes have been made